BlueLine module options

MEDIA TEMPERATURE CONTROL

Higher quality, precise sterilization

Sterilization of liquids with high throughput

Sterilization of waste, solids
and porous materials

Sterilization of hazardous substances

Traceability of the sterilization process

GLP batch printer

Built-in printer, integrated into the unit,	Dot matrix printer, 50 mm print width, large roll W/Ø 58/50 mm Documents the controller ID, date, batch number, process steps from start to end of programme with time, chamber temperature and chamber pressure, as well as any error messages Records digitally displayed process data from the controller
Recording during programme execution	yes
Printing mechanism	Dot matrix printer, plain paper
Print sequence	Sterilisation 1 minute
Calculation of saturated steam temperature from steam pressure	Yes

GMP batch printer

Built-in printer, integrated into the unit	Dot matrix printer, 50 mm print width, large roll W/Ø 58/50 mm Records the controller ID, date, batch number, process steps from start to end of programme with time, chamber temperature and chamber pressure, as well as any error messages Records temperature and pressure data from controller-independent, calibrated reference sensors Further functions and operation as per GMP batch printer
Second display	Displays temperature and pressure data from control-independent, calibrated reference sensors
Temperature probes for chamber and media temperature as dual-sensor elements	The second sensor of the dual-sensor element records the data independently of the process control
Second pressure sensor	Independent of the process control
GMP-compliant	yes
Calibration certificates for temperature probes and pressure sensor of the sterilisation chamber	ISO 9000 or DKD (Standard IS

VF module for single-stage and multi-stage vacuum

Liquid ring vacuum pump
Speed at 50 Hz	rpm	2900
max. Max. discharge pressure	bar	0,3
max. Max. permissible pressure differential	bar	1,1
Sound pressure level at 80 mbar inlet pressure	dB(A)	68
max. Max. saturated gas temperature	°C	100
max. Max. permissible operating fluid temperature	°C	80
Inlet flow rate	m³/h	9 to 57
Simple and fractional pre-vacuum	“T 8 kPa
Additional sterilisation programmes	EV instruments, EV waste FV instruments, FV waste

VT module vacuum drying

Heating jacket in sandwich construction = double jacket	90% of the jacket space is steam-heated via a steam generator
Vacuum drying	< 20 kPa
Sterile ventilation	Membrane filter, μ = 0.2 mm, 0.1 m², hydrophobic, steam-sterilisable, retention capacity ≥ 99.5 %
Additional programme option	Adjustable drying time from 0 to 199 min